WINNERS OF THE 2003 BEST NEWCOMERS TROPHY AT THE 12 HOUR!!

Mower #1 Re-Build

After racing for a season on an already un-tidy mower we thought it could do with a re-build. We want to strip the mower, clean, re-paint, re-make the A-frame, and look into a bike clutch. Check back during the winter months for progress on our re-build.

Stage 1

Well we started the rebuild! The mower has been stripped. Engine removed, front steering removed, A-Frame removed, front and rear panels removed. Cutting deck removed, and the T-Drive and axle are off.

The front panel has been straightened and welded and after a bit of sand blasting should be ready for a bit of paint - but that won't be for a while!

This evening we decided to open up the T-Drive to make sure it was ok and also see how the T-Drive was made up so when we got the new one we knew what needed doing.

The full range of pics can be found here.

For 1st Pictures of the Clutch Click here.

For Working Pictures of the Clutch Click here.

For More Build Pics Click here.

This is as far as we have got, check back soon for any more progress we may have made.